Single Channel IP to HDMI Re-CoderThe IP2HDMI-01 module processes video and audio streams from IP cameras and converts them to an HDMI format output.Supporting up to 4K resolution, the IP2HDMI is the perfect tool for displaying Ultra High Definition IP cameras, such as the IRIS-PHOTON range on a chart plotter that supports 4K video inputs, such as Garmins 9000 series MFDs, or displaying the cameras on a UHD TV.With a secondary VGA output for legacy systems the device simply needs to be configured onto your camera network and then the IP address of your camera set.Small, lightweight and lowpower, with surface mounting ears, the device can easily be installed behind a TV or chart plotter with very little power budget required.The device is ONVIF Profile S compliant and supports all leading IP camera protocols.Features:Converts IP Camera Stream to HDMI (and VGA)Perfect for showing IP Cameras on TV and Chart PlottersSupports Up to 4K Ultra Hi-Def VideoSupports all major IP Camera Formats and CompressionSmall, Compact and Low CostEasy Installation and Low Power ConsumptionSupports ONVIF Profile SIdeal for On Board and In Vehicle Camera SystemsSpecifications:Weight/Dimensions – .5lbs / 6.7″ x 2.4″ x 1.4″Material – Aluminum, Hard AnodizedVideo Output Formats – 1 x HDMI port / 1 x VGA port (Simultaneous output)Camera Input – 1 x Ethernet RJ45 10/100Supported Resolution – Variable – Up to 4K (8MP)Protocols – TCP/IP, P2P, UPnP, NTP, DHCP, PPPoE, HTTP, HTTPS, DNS, DDNS, SMTP, RTSP, ONVIFCompression – Ultra 265/H.265/H.264Input Voltage – 12VDCPower Consumption –