Description Description Durable Polished andBright Anodized Finish GUARANTEED! – Love it or Return it. Mounts onto Casting Platform Leaning Rail or any rail or tubing that has an outside diameter of 1.66″ Swivel mountand rotating clamp design allow you to position rods at any angle. Constructedfrom 6063-T6 aluminum and 303 stainless steel fasteners. INSTALLATION 1. Determine where you will install the rod holders. It is customary to equally space the rod holders across the back of the T-Top frame as shown below. You may place also them at any location you like and some fishermen like to have a rod holder on each side of the T-Top 2. Install the Rod Holder to the Clamp by inserting the Post into the Receiver and tightening Receiver Bolts. Apply a thin film of grease to threads before tightening. 3. Remove the Tube Clamp bolts and apply thin film of grease to the threads. Install the Tube Clamp to the desired location on the T-Top Canopy Frame and tighten Tube Clamp Bolts to 22 ft-lbs. 4. If needed loosen the Receiver Bolts and swivel the Rod Holder to the desired position. Then retighten Receiver Bolts to 22 ft-lbs. View All Close